How To Install Window Blinds In Seattle

Many Seattle homeowners opt for window blinds when they want more privacy and control over sunlight in their homes. They’re a useful and economical window covering. Capable DIYers could also secure them in a couple of steps. Even so, nothing is better than hiring a professional window treatment installer. Here are the basics of installing window blinds and when you ought to phone the pros to do it for you.

Take Accurate Measurements

Before you begin, determine if you should get outside-mount or inside-mount blinds. This crucial detail will help you see where to measure. Take measurements of the depth, height, and width inside your frame for inside-mount installations. When hanging outside-mount blinds, measure the height and width of your window, which includes the trim, and add three inches to your measurements to ensure adequate coverage. Measure with precision–refrain from rounding up or down. Poorly fitting blinds will not work correctly.

Choose Your Blinds

After you know your measurements, you may choose your blinds. You probably know what style of blinds you want. Pick blinds that are as close to your measurements as possible. Ready-made blinds often won’t fit exactly, either sticking out too much or not meeting the end of the window completely. Ensure you have fasteners that permit you to install the blinds at the right depth, too. You’ll need to choose custom-made blinds and hardware for a perfect fit.

Install Your Window Blinds

Your blinds should come with instructions. Adhere to them to affix your particular product. If you want a sample of how difficult it is to install window blinds in Seattle, here is a summary of general steps to provide a general idea.

 

Inside Mount Blinds

 

1. Place a bracket at the top of the inside of the window around one inch from the outer edge. Make sure this spot won’t hinder the blind’s operating mechanisms. Use a pencil to mark the bracket holes.
2. Drill pilot holes in the proper spots.
3. Line up the hardware with your pilot holes and fasten with screws.
4. Redo the first three steps for the other bracket.
5. Pop the end caps onto the blind’s top rail. Fit the top rail into the brackets.

Connect the tilt wand and check it. In addition, evaluate the pull cord.

Outside Mount Blinds

1. Determine if you’re attaching to the window trim or wall above the window. Grasp the headrail and make certain the blind covers the lower edges of the window.
2. Mark the ends of the headrail.
3. Measure four inches from each headrail mark and mark here for the screws.
4. Drill pilot holes on your marks.
5. Line up the bracket holes with the drilled holes and fasten with screws on both sides.
6. Fit the blind rail into the brackets.

Connect the tilt wand and test to ensure everything works.

Choose The Simplest Way To Install Blinds 

As you know, you aren’t required to install blinds yourself. The most effortless way to install window blinds in Seattle is to hire a professional window treatment installer. They will assist you at every step. They’ll help you pick blinds that accommodate your needs, make precise measurements for a custom product, and install them for you. They do this daily, so they’ll complete your project swiftly and accurately. They’ll know how to diagnose any challenges without taking hours searching for help on websites. A window treatment specialist will also offer higher-quality blinds than large retail outlets or online marketplaces.

Avoid The Hassle And Have Sunburst Shutters Install Your Window Blinds In Seattle

Getting new window blinds in Seattle couldn’t be more effortless when you turn to Sunburst Shutters Washington. We’ll help you select custom blinds that will match your windows precisely, and our professional installation crew will attach them for you. All you have to do is call 360-464-2277 or complete the form on this page to schedule a no-cost in-home consultation.